ASTi Sound+Sleep ASM1002 Kullanıcı El Kitabı - Sayfa 5
Kişisel Bakım Ürünleri ASTi Sound+Sleep ASM1002 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. ASTi Sound+Sleep ASM1002 8 sayfaları. Adaptive sound sleep therapy system
Ayrıca ASTi Sound+Sleep ASM1002 için: Kullanıcı El Kitabı (12 sayfalar), Kullanıcı El Kitabı (12 sayfalar)
Sayfayı Yazdır
T
I
ECHNICAL
NFORMATION
Specifications
Sound Categories
Sound Environments
Speaker Compensation
Headphone Jack
Power Requirements
Power Consumption While Off
To Restore Factory Settings
This procedure will reset your Sound+Sleep to its original "out of the
box" settings.
1. Turn off the Sound+Sleep
2. Press and hold the POWER button
3. Release the POWER button when the power lamp flashes once
Sound+Sleep Owner's Manual
10
30
Five-band parametric EQ
3.5mm stereo
5 Volts, 500 mA DC max
< 0.25 Watts
(typically 0.1 Watts)
Troubleshooting
Symptom
Possible Cause
No operation
Disconnected power plug
when POWER
button is pressed
Unit is connected to a
switched wall outlet
Faulty wall outlet
Product needs to be reset
Unit is on, but no
Volume is set too low
sound is heard
Headphones are plugged
in
Unit is on, but
Volume is set too low
volume is too low
Adaptive Mode is enabled
Volume is Too
High
Other unexpected
behavior
Visit astisupport.com for more assistance.
Solution
Check the power connection on
the bottom of the unit and at the
wall outlet. Make sure that both
are firmly seated.
Move the unit to an un-switched
outlet.
Move to a working outlet.
See To Restore Factory
Settings
Press or hold the VOLUME UP
button to increase volume
Remove the headphones. The
speaker is muted when
headphones are connected.
Press or hold the VOLUME UP
button to increase volume
In Adaptive Mode, the sound will
be low when there is no noise in
the room. If you prefer to
maintain the sound at high
volume, turn off Adaptive Mode.
Press or hold the VOLUME
DOWN button to decrease the
volume
See To Restore Factory
Settings
astisupport.com