Dongguan Taide Industrial BT012 Kullanıcı Kılavuzu - Sayfa 4

Konuşmacılar Dongguan Taide Industrial BT012 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dongguan Taide Industrial BT012 5 sayfaları.

Sayfayı Yazdır

Charge in power-off state. Insert the attached USB power cable with the micro USB end into

Quick charge:

the USB power port of BT012 and the other end into the USB port of PC or the USB charger to start charging.

When the charging is over, the red indicator will be off.

VII. Compatibility

Device equipped with BLUETOOTH 3.0 or higher version (for details please refer to the relevant agreements,

general specification), such as the IPAD, IPHONE (the second generation and IPHONE with updated IPHONE

3.1 software), IPOD TOCH, MAC with BLUETOOTH , and majority of smart phone or computer support

BLUETOOTH.

Bluetooth 3.0 including agreements as：A2DP, AVRCP,HFP

VIII. Troubleshooting

Phenomenon

Problem

Failure in connection and

pairing for many times

The sound is small or

distorted

Discontinuous music

The indicator for Bluetooth

mode is not on

FCC Warnings Statements:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Troubleshooting

1. Inspect whether the sound box is in the status of searching, or,

restart the machine.

2. The surrounding Bluetooth equipments are plentiful, which causes

the difficulty in searching. So, please close the other Bluetooth

equipments.

1. Inspect the volume of the Bluetooth equipment and adjust the

volume.

2. The power of battery is insufficient, please charge it.

See whether the effective connection distance of sound is exceeded,

or, whether there is obstacle between the sound box and the Bluetooth

equipment.

1. It indicates that the power of the battery is not sufficient. Please try

again after charging it.

2. Restart the machine.