Donner SPACLINE DMK 25 Kullanıcı Kılavuzu - Sayfa 4
Müzik Pedalı Donner SPACLINE DMK 25 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Donner SPACLINE DMK 25 8 sayfaları. Mini midi keyboard
Ayrıca Donner SPACLINE DMK 25 için: Manuel (9 sayfalar)
Sayfayı Yazdır
Connection steps:
1.Select option > device setup to connect.
2.Select "DMK25" as the MIDI device. If "DMK25" does not appear, try refresh or reopen the editor, or plug in and out DMK25.
3.Connection succeeded, the light is on.
step 1
Managing Your Programs and File
About Programs
A Program is a preset file (.dmk25) containing all of the MIDI assignments you make in the Editor. Using Programs lets you
maintain several different control configurations to use in different situations. For instance, you may use different Programs
with different kinds of software, or you may use some Programs for production and others for performance.dmk25 mini can
store a maximum of four Programs, and you can store additional Programs on your computer to load onto DMK25 mini with
this editor.
This chapter explains how to load Programs into the editor, save Programs onto your computer, and send Programs to your
connected DMK25 mini.
Programs Managing
To send a Program settings to the PROGRAM or RAM of a connected DMK25 mini, click the "SEND"
button.
To get a Program settings to the PROGRAM or RAM of a connected DMK25 mini, click the
"GET"button.
It should be noted that,RAM is the default setting for starting up.
Click the "FACTORY RESET",would load the factory settings to the editor.
File Managing
To load a Program from your computer, go to File > Open, locate the desired file
(.dmk25), and click Open.
To save a Program, go to File > Save, select the desired location, enter a file name, and
click Save. The Program will be saved as a .dmk25 file.
To save a Program under a different name or to a different location, go to File > Save As,
select the desired location, enter a file name, and click Save. The Program will be saved
as a .dmk25 file.
step 2
2
step 3