Donner VIPER VOLUME & EXP Manuel - Sayfa 2
Müzik Pedalı Donner VIPER VOLUME & EXP için çevrimiçi göz atın veya pdf Manuel indirin. Donner VIPER VOLUME & EXP 2 sayfaları.
●Volume/Expression Combo Pedal
The Viper pedal combines passive volume pedal and expression pedal in one, which can be used with a variety of musical instruments and audio
devices. The unit can switch between two modes automatically by detecting input jack connection.
●No Power Supply Needed
You don't need an extra power supply for the unit: connect it to your gear, and DONE! When using as an expression pedal, you may need some extra
settings on the device you're going to control (depending on devices).
●Pure Analog Signal Path
The Viper features 100% analog circuit design which keeps your sound pristine.
●Carefully Selected Components
The Viper is designed and built with carefully selected components to ensure best sound quality and road performance. The special designed chassis
ensures touring reliability.
Features
●Convenient compact size
●Passive volume/expression combo pedal
●No power supply needed
●Works well with common pedals, multi-FXs and more (using as
expression pedal)
●Sturdy, lightweight casing
Overview
Specifications
Input Impedance (Volume Mode): 100k Ohms
Pot Resistance (Expression Mode): 10k Ohms
Dimensions: 148.5mm (D) x 65.5mm (W) x 61mm (H)
Weight: 280g
Use Viper As A Volume Pedal
Connect to
Connect to
your amp or
your instrument
other gear
or other gear
When using your Viper as an expression pedal, connect the OUTPUT jack to your device's expression pedal INPUT jack with a TRS (Tip-Ring-Sleeve)
cable, and LEAVE THE INPUT JACK UNCONNECTED. We recommend you to use a cable with TRS plugs ON BOTH ENDS (at least the plug
connected to the unit should be a TRS end).
Output
Jack
Expression
Sleeve Ring Tip
Schematic
Usage Scenarios
Use Viper As An Expression Pedal
Connect to
other devices
with a 1/4"
TRS cable
As the schematic shows, the TRS plug tip connects to the potentiometer
POT
wiper. If the polarity is incorrect, please reverse the polarity (Tip and Ring)
of your cable and try again.
When using as an expression pedal, the potentiometer resistance value is
10kΩ. Please make sure the potentiometer resistance is supported on
your devices.
Leave it
unconnected