Astonica 05-04-07881 Kullanım Kılavuzu - Sayfa 2

İç Mekan Mobilyaları Astonica 05-04-07881 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Astonica 05-04-07881 2 sayfaları. Contempo wrought iron patio table

Sayfayı Yazdır

ASSEMBLY INSTRUCTIONS AND CONTENTS

PARTS LIST

ITEM 05-01-07881

1. (1) Table top

2. (4) Table legs

3. (4) Bolts

4. (4) Nuts

5. (4) Wing Nuts

Carefully remove contents from package

If any parts are missing do not attempt to use

until they have been obtained and correctly installed

Household tools needed for assembly.

DO NOT OVER TIGHTEN BOLTS.

THIS MAY DAMAGE THE THREADS OR THE WOOD PIECES.

While assembling, wait to tighten until are pieces are in place

Assembly of 05-01-07881 Patio Table

1. After removing all parts and hardware from carton, mount one of the legs to

the center support ring by aligning the holes, and threading a bolt through

the leg and support ring. Then hand-tighten a nut onto it.

DO NOT TIGHTEN BOLTS UNTIL ALL PARTS HAVE BEEN ASSEMBLED.

2. Repeat this step with the other three legs. (See Figure 1)

3. Lay tabletop upside down on a flat, non-scratching surface. Turn leg

assembly over and slip the tops of the legs over the bolts mounted

underneath the tabletop. Thread a wing nut on top each one. (See Figure 2)

4. Tighten all bolts and wing nuts securely. With the help of a friend, turn

table right side up.

Figure 1

NOTE:

Figure 2