Acer X243W Hızlı Başlangıç Kılavuzu - Sayfa 13

Monitör Acer X243W için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Acer X243W 24 sayfaları.

INSTALLATION

To install the monitor to your host system, please follow the steps as given

below:

Steps

1. 1-1

Connect Video Cable

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the VGA video cable to the computer.

1-2

Digital Cable (Only Dual-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect one end of the 24-pin DVI cable to the back of the

monitor and connect the other end to the computer's port.

1-3

HDMI Cable (Only HDMI-Input Model)

a. Make sure both the monitor and computer are powered-OFF.

b. Connect the HDMI cable to the computer.

2. Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC

outlet.

3. Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer.

This sequence is very important.

4. If the monitor still does not function properly, please refer to the

troubleshooting section to diagnose the problem.

EN-12

P241W A