Astonica Sante Fe Kullanım Kılavuzu - Sayfa 2

İç Mekan Mobilyaları Astonica Sante Fe için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Astonica Sante Fe 2 sayfaları. Rocker chair

PARTS & HARDWARE LIST

PART #

Chair Base

Seat and Back Assembly

6mm x 16 Hex Bolts

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

NOTE: This product is intended for residential, non-commercial use.

DESCRIPTION

QUANTITY

Figure 1

1. Place the chair base (A) upright on a flat surface (Figure 1).

2. Hold the seat and back assembly (B) so that the steel rods extending from the

springs line up with the hollow steel tubes underneath the seat. Slide the rods

completely inside the steel tubes.

3. Thread two hex bolts (C) into the hex nuts mounted underneath the

steel tubes. Tighten securely.

4. Repeat Step 3 on the other side.

ASSEMBLY INSTRUCTIONS