Doodle Labs Smart Radio Sorun Giderme Kılavuzu - Sayfa 6
Ağ Donanımı Doodle Labs Smart Radio için çevrimiçi göz atın veya pdf Sorun Giderme Kılavuzu indirin. Doodle Labs Smart Radio 16 sayfaları. Advanced mimo mesh router for resilient private wireless networks
Smart Radio Trouble-Shooting
Guide
16
35
4. In this case, the index is 16. Next, run
$ ping -6 fe80::%16
Pinging fe80::%16 with 32 bytes of data:
Reply from fe80::%16: time=413ms
Reply from fe80::%16: time<1ms
Reply from fe80::%16: time=2ms
Reply from fe80::%16: time=1ms
5. Assuming the ping worked, we can check the ipv6 address of the Smart Radio with
$ netsh interface ipv6 show neighbors
Interface 16: Ethernet
Internet Address
--------------------------------------------
fe80::230:1aff:fe4e:aabc
(Router)
a. From here, we can see the ipv6 address (in bold). Note that the corresponding
physical address is starts with 00-30-1a which is true for all Doodle Labs
products. So you can try logging in with
ssh root@fe80::230:1aff:fe4e:aabc%16
6. Once you are logged into the CLI, you can check the ipv4 address of the
interface
root@smartradio:~# ip a show dev br-wan
6: br-wan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether 00:30:1a:4e:aa:26 brd ff:ff:ff:ff:ff:ff
inet 10.223.187.38/16 brd 10.223.255.255 scope global br-wan
valid_lft forever preferred_lft forever
inet 192.168.153.1/24 brd 192.168.153.255 scope global br-wan
valid_lft forever preferred_lft forever
inet6 fe80::230:1aff:fe4e:aa26/64 scope link
valid_lft forever preferred_lft forever
Trouble-Shooting Link Quality
This section covers trouble-shooting problems with the link quality. If you are looking for
information on optimizing the link quality, please read the guide, "Optimizing the RF Link", in
our technical library [1]. This section is broken down into three sub-sections which cover
1. No wireless link
© 2021 Doodle Labs. All rights reserved.
1500
connected
Page 6
Ethernet
Physical Address
-----------------
00-30-1a-4e-aa-bc
Type
-----------
Stale
br-wan
September 8, 2021