Amerisolar Wolfram-BAT-10.24 Kurulum Kılavuzu - Sayfa 15

Kamera Aksesuarları Amerisolar Wolfram-BAT-10.24 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Amerisolar Wolfram-BAT-10.24 20 sayfaları.

Sayfayı Yazdır
Worldwide Energy and Manufacturing USA Co., Limited
Running lights
5
5 
Alarm indicator 
Capacity 
6 
DIP switch 
RS‐232 
communicati
7 
on interface 
External 
8 
communicati
on port 
External 
9 
communicati
on port 
10 
Cascade terminal  Link Port 0
11 
Cascade terminal 
12 
Positive interface 
13 
Positive interface 
14 
Negative 
15 
Negative 
16 
Hanging ear 
Step 1: Connect the circuit breaker to the battery box
Two 2P circuit breakers are installed on the cabinet, and each battery box is connected to one
circuit breaker, that is, one circuit breaker controls one battery box. The wiring sequence on
the circuit breaker is "-, +, -, +" from left to right. The circuit breaker on the left controls the
bottom battery box, and the circuit breaker on the right controls the upper battery box.
Green light. In standby, the indicator light 
flashes. When charging, the indicator light is 
RUN 
always on. The indicator flashes when 
Red light. The indicator light flashes when 
ALM 
alarming. When protected, the indicator light 
There are 6 green lights to show the battery 
CHARGE 
capacity, and each green light represents 
ADD 
(Reserved) 
Console 
Communication with host computer 
CAN 
Communication with external devices 
Serial 
Communication with external devices 
Used for master‐slave cascade communication. 
Use a standard direct network cable 
connection, the host is connected to PORT1, 
and the slave is connected to PORT0. 
Used for master‐slave cascade communication. 
Link 
Use a standard direct network cable 
Port 1 
connection, the host is connected to PORT1, 
and the slave is connected to PORT0. 
"+" 
Positive interface 
"+" 
Positive interface 
"‐" 
Negative interface 
"‐" 
Negative interface 
Used to fix the electric box (two on the front 
panel and three on both sides)
13