Door Knox VDP404 Kullanıcı Kılavuzu - Sayfa 6
İnterkom sistemi Door Knox VDP404 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Door Knox VDP404 13 sayfaları. Wireless external door entry kit
Sayfayı Yazdır
5. If the name plate is needed, take off the name plate cover, put the name plate inside and
refit cover.
6. Finish wiring connection of the power
supply and the electric lock according
to the wiring diagram.
8. TheVDP301 outdoor camera unit is not IP rated and is not sealed. Whilst the unit is classed
as an outdoor unit, it must be adequately protected from rain and weather conditions and the
rain shield sealed to avoid water ingress from the back of the unit. Any cable connections
running into the unit must run upwards. It is recommended that additional protection is
provided when installed in an exposed position.
Email:
7. Fasten the camera unit rain shield
with screws.
Doc XVDP400
Last Revised: 13/07/2017