astra telematics AT210 Kurulum Kılavuzu - Sayfa 3

GPS astra telematics AT210 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. astra telematics AT210 5 sayfaları. Vehicle tracking device
Ayrıca astra telematics AT210 için: Kullanıcı Kılavuzu (9 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)

Sayfayı Yazdır
astra telematics AT210 Kurulum Kılavuzu
7. Check status LEDs
a. Place the AT210 (or AE004 GNSS antenna) somewhere with reasonable view of the
sky in correct orientation for a minute or two and then check the status LEDs as
below:
GSM status
a. During normal operation the LEDs should:
a. GNSS
b. GSM
c. POWER
8. Slide the AT210 assembly into the enclosure
a. Note that the GNSS antenna faces the top of the enclosure (with the slots)
b. Ensure that the PCB is aligned with the guide slots inside the enclosure and carefully
push in until the clips snap together
double flash once per second
single flash every 2 seconds
stays on constantly
GNSS status
External power