DoorHan SECTIONAL-800PRO-CE Kurulum ve Kullanım Kılavuzu - Sayfa 14

Kapı Açıcı DoorHan SECTIONAL-800PRO-CE için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. DoorHan SECTIONAL-800PRO-CE 20 sayfaları.

Sayfayı Yazdır
DoorHan SECTIONAL-800PRO-CE Kurulum ve Kullanım Kılavuzu
2. Absolute cycle counter
Press «+»
After you enter the menu item «2», 4 digits will be displayed in turn: the first digit — tens of thousands, the second digit —
thousands, the third digit — hundreds and the fourth digit — tens.
For example: the first digit — «0», the second digit — «1», the third digit — «3» and the fourth digit — «9». Total number of
cycles – 1 390.
3. Prohibition of control commands for closing
Press «+»
NOTE: Door closing is possible only when the «Automatic door closing» function is activated. When the door is closing, a
controlling command reverses the door to open again.
4. Type of safety device (photocells)
Press «+»
5. Door opening height during ventilation
Press «+»
To control the «partial opening» function, it is necessary to select the number of the remote control button in the fourth menu
item (see section 6.3), which will subsequently activate this function. When you press the selected button on the remote control,
the door will open to the set position (see section 6.4, p. 5).
NOTE: The selected button have to be saved in the receiver memory.
6. Force adjustment
Press «+»
«6» will light, press «Р»
14
«2» will light, press «Р»
«3» will light, press «Р»
«4» will light, press «Р»
«5» will light, press «Р»
Pressing «+» or «-» choose the function value: «1» – min. force, «6» – max. force (by
default – «3» )
The first digit is displaied
Pressing «+» or «-» choose the function value: «Y» – on, «n» – off, (factory
setting – «n»)
Pressing «+» or «-» choose the function value: «0» – external; «1» – built-in
(factory setting – «0»)
Pressing «+» or «-» choose the function value: «0» – 1000 mm; «1» – 200 mm
(factory setting – «0»)
OPERATOR PROGRAMMING
The second digit is displaied
Press «P» to save the settings
Press «P» to save the settings
Press «P» to save the settings
Press «P» to save the settings