Acer XZ350CUbmijphz Kullanıcı Kılavuzu - Sayfa 24

Monitör Acer XZ350CUbmijphz için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer XZ350CUbmijphz 28 sayfaları.

Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to

the right to navigate to the element you wish to adjust and press the joystick to enter it.

Toggle to the left or right to adjust the sliding scales.

Over Drive: Select Off, Normal, or Extreme.

FreeSync: To control support FreeSync or not, default is On.

---------------------------------------------------------------------------------------------------------

Note: Only in the Support FreeSync environment the control the FreeSync (On/

Off) effect, such as in NVIDIA or Intel graphic card, Non-FreeSync Environment

no effect.

MPRT: To choose whether to support dynamic picture more clean control, default is Off.

---------------------------------------------------------------------------------------------------------

Note:

1. PIP/PBP mode is not support MPRT.

2. HDR setting: "Auto" is not support MPRT.

3. MPRT set "On", when to turn on FreeSync, will auto set MPRT is "Off".

4. MPRT set "On", when to adjustment (Brightness, Blue Light, ACM), will auto

set MPRT is "Off".

5. MPRT function does not affect the (Logo, Aim Point, Message and Input

Icon) brightness.

6. MPRT setting "On", when detection of Input Timing <75Hz, will auto off the

MPRT and gray out to disable.

7. MPRT = (Normal or Extreme), because the IC control dynamic picture is

cleaner, so the overall Brightness will be dark, "Extreme" will be darker than

"Normal".

Aim point: Show an Aim point on the screen for shooting games.

-----------------------------------------------------------------------------------------------------------

Note: In PBP mode the Aim point not displayed.

OSD

Mode - Standard

Picture

Language

Color

OSD Timeout

Audio

Transparency

Refresh Rate Num

Gaming

OSD

System

Move

Enter

Press the MENU key to open the OSD.

Toggle the joystick to the up or down to select OSD from the OSD.Then toggle to the

right to navigate to the element you wish to adjust and press the joystick to enter it.

English

Oﬀ