DoorHan SLIDING-2100 Kurulum ve Kullanım Kılavuzu - Sayfa 3
Garaj Kapısı Açıcı DoorHan SLIDING-2100 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. DoorHan SLIDING-2100 16 sayfaları. Drive
Ayrıca DoorHan SLIDING-2100 için: Kurulum ve Kullanım Kılavuzu (12 sayfalar), Kurulum ve Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
1.
GeneRAL InFoRMAtIon
The SLIDING-1300/2100 operators are intended for automation of sliding gates without a pass door.
It consists of a mechanical reducer in oil bath and an electric motor with a built-in control unit. The reducer and the motor have
a common housing. The rack fixed on the gate transforms the rotational motion of the output sprocket into the linear motion of
the gate.
An external control button is connected to the control unit.
The self-locking reducer ensures the gate is mechanically locked if the motor fails. If the power fails, you can open or close the
gate by hand using an emergency manual release.
1.1. Basic functions
• An automatic stop system ensures quick and safe stop of the motor in end positions.
• Electronic noncontact limit switches ensure stop of the gate in end positions.
• In case of power failure, the operator can be released with a lever, after that you can open or close the gate by hand using
a chain.
• The operator can be operated from stationary button or remote control in the stepped mode (open-stop-close-stop).
• The control unit and motor-reducer is placed within operator's housing. The operator produces low noise and is equipped
with heat protection. The automatic SLIDING-1300/2100 operators are designed for use with sliding doors. Other than its
intended use is forbidden.
1.2. technical specifications
Model
supply valtage, V/Hz
Absorbed power, W
Reduction ratio
Rack, mm
Pinion type
Max. linear force, n
Max. output torque (n•m )
termal protection, °C
Use frequency, %
operating temperature range, °C
Protection class
Max gate weight, kg
Gate speed, m/min
Control board
Limit switch
Capacitor, μF
1.3. operator package
When you receive your SLIDING-1300/2100 operator, unpack it and check that the operator is not damaged. If any damages
are found, contact the operator supplier.
the sL1300KIt and sL2100KIt includes the following items.
№
1
Operator SLIDING-1300/2100 (oil bath, integral control unit)
2
3
The assembly basis for concreting
4
5
6
7
8
9
sLIDInG-1300
Component
Limit switches
Fixing package
Release keys
Key switch
Rack (1 m)
photocell
Signal lamp
220
(±10%)/
550
1:32
М4×12.566
900
27.5
–40...+40
Ip44
1 300
pCB-SL
Magnetic
22
general InfOrMatIOn
sLIDInG-2100
50
800
Z16
1 350
43
125
70
2 100
10
37
Quantity
1 pc
1 pair
2 pc
2 pc
2 pcs
1 pc
4 pcs
1 pair
1 pc
3