Astralpool NARBONNE Kurulum ve Bakım Kılavuzu - Sayfa 6
Aydınlatma Ekipmanları Astralpool NARBONNE için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Astralpool NARBONNE 19 sayfaları. Above-ground automatic pool cover
Sayfayı Yazdır
ENGLISH
ROLLER INSTALLATION
- Position the roller as indicated in the diagram, making sure it is properly centred
with respect to the pool. It must be perfectly horizontal when installed (diagonals
dimensions).
- If there are rays, the roller should be pushed forward to the pool to enable the slats
to lower properly in its full width.
Dimension X
- Mark the position of the roller stand and polish or flatten the coping stone to obtain
a flat horizontal, even surface for placing the stands.
- Cut the coping stone (dimension X) to make it easier for the slats to be lowered over
the pool. Dimension X may vary according to the length of the pool; roller (roller
diameter on the roller shaft). (See page 05/18 table dim. X).
- After assembling the roller and making the adjustments, position the two roller
stands to the final position on the coping stone, using M10×75 Stainless Steel Bolts.
- Not to position it too behind swimming pool in order to avoid the friction of the
blades on the nose of curbstones when the cover is completely rolled up and this
particularly in the center of the roller
Note: If the skimmers are fixed along the length of the pool, we recommend
replacing their existing flanges with 2 mm thickness Stainless Steel flanges to easier
the slats way and avoid their blockage.
.
5/17
Revision number B-007-2012-10-05