Astralpool SLX Detaylı Talimatlar - Sayfa 6

Sualtı aydınlatması Astralpool SLX için çevrimiçi göz atın veya pdf Detaylı Talimatlar indirin. Astralpool SLX 6 sayfaları. Underwater niche lights for fibreglass pools
Ayrıca Astralpool SLX için: Kurulum ve Kullanım Talimatları Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Kurulum Talimatları Kılavuzu (7 sayfalar), Kurulum Talimatları (4 sayfalar)

7. Next, configure the transition effect. To indicate the currently selected effect, the light will

display a demonstration of the effect using red, green and blue colours. The available effects are:

Gradual, Fade, Jump and Flash. To change the selected effect, perform a single switch sequence

and wait at least three seconds. To confirm your selection, perform a double switch sequence.

8. Finally, choose the duration of transition between segments. Similarly to configuring the number

of segments, the light will flash Green a certain number of times with a Red flash in between.

Initially the number of Green flashes is 0, so you will see Red flash only. The number of Green

flashes indicates the duration of the transition.

To change the duration of the segments, perform a single switch sequence and wait at least three

seconds. To confirm your selection, perform a double switch sequence.

9. All configuration steps are now completed and stored into memory. The light will commence

displaying your new pattern.

10. You can reuse your customised pattern at any time, simply by changing the colour selection to

"Customised Pattern".

Notes:

 You may repeat a colour in multiple segments, e.g. Red, Blue, Red, Green.

 "Gradual effect" means that the old colour is gradually blended into the new colour.

 "Fade effect" means the old colour will fade to black before the new one fades in.

 "Jump effect" will immediately change from the old colour to the new.

 "Flash effect" will immediately black out the light at the start of the transition time, show black

during the transition, and then immediately show the new colour at the end of the transition.

 The total time to show one cycle of your customised pattern can be calculated this way:

Inst.374 Astral Pool SLX Light Detailed Instructions V10.15

No. Green Flashes

Rainbow Pool Products

PO Box 2388, Mansfield Qld 4122

Telephone STD 61-7-3849 5385

Facsimile STD 61-7-3849 5384

Web: www.rainbowpoolproducts.com.au

Transition Duration

0.2 seconds

1 second

2 seconds

3 seconds

4 seconds

5 seconds

6 seconds

7 seconds

8 seconds