Canon PIXMA MP620 series Kurulum Talimatları - Sayfa 2

Hepsi Bir Arada Yazıcı Canon PIXMA MP620 series için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Canon PIXMA MP620 series 4 sayfaları. Installing your multifunction on additional computers windows os
Ayrıca Canon PIXMA MP620 series için: Kurulum (4 sayfalar), Tamamlayıcı Kılavuz (6 sayfalar), Manuel (20 sayfalar), Şartname (2 sayfalar), Manuel (10 sayfalar), Manuel (8 sayfalar), Ağ Kurulum Kılavuzu (22 sayfalar), Kurulum Kılavuzu (11 sayfalar), Bağlantı Kılavuzu (19 sayfalar), Kurulum Kılavuzu (7 sayfalar), Servis Kılavuzu (46 sayfalar), Yükleme (21 sayfalar)

Sayfayı Yazdır
Canon PIXMA MP620 series Kurulum Talimatları
3-A
1
On the Canon IJ Network Tool
screen, select LAN connection,
then click OK.
4
When the Access Points screen
appears, select an access point to
use, then click Connect.
To connect to the access point with WEP
or WPA displayed in the Encryption
column, enter the network key (WEP key
or WPA key) in Network Password, then
click Connect.
3-B
1
On the Canon IJ Network Tool
screen, select LAN connection,
then click OK.
4
Click Manual Setup.
•
Confirm the Encryption column to
check the encryption method being
used.
C o nn ec ti n g t o Ai r Por t Ne twork s
W i t h a S i ng l e A ir Po rt Ac c ess P oint
Use These Instructions if Your Network Has Only One AirPort Networking Device
(Single Time Capsule, AirPort Extreme, AirPort Express, etc.)
For Users With Multiple Access Points (Wireless Routers) Proceed to Section 3-B
2
If the Setup Preparations dialog box
appears, confirm that preparation is
complete, then click OK.
You can retrieve your network
key by using the Canon PIXMA
Wireless Setup Assistant or
the instructions which can be
downloaded from the Canon
support webpage (www.usa.
canon.com/downloadlibrary).
If you are unable to retrieve the
network key or other settings refer
to the manual of your access
point or router, or contact its
manufacturer.
C on nec t i ng to Ai r Por t N etworks
Wi t h M ul t i ple Ac c es s Points
Use These Instructions if Your Network Has Multiple AirPort Networking Devices
(Including Time Capsule, AirPort Extreme, AirPort Express, etc.)
For example: Airport Extreme AND Time Capsule
2
If the Setup Preparations dialog box
appears, confirm that preparation is
complete, then click OK.
5
Enter the Network Name. (Also
called SSID or Service Set Identifier
that you would like the machine to
join.)
5
a. Disconnect the USB cable.
b. Click Next.
3
Select Setup in the drop-down
menu, select MP620 series in
Printers, then click OK.
3
Select Setup in the drop-down
menu, select MP620 series in
Printers, then click OK.
6
Select Use WPA2 from the drop-down menu.
If the network uses WPA/WPA2 security,
selecting Use WPA will give the same
results.