Memory card is not set. Insert the card
after checking the direction.
DPOF information is not saved.
The number of copies to print is not
set. Input the number of copies using
[+]/[-].
This layout is available only for A4 or
8.5"x11" (215x279).
Cannot specify "stickers" and "half-
side layout" together. Check markings
on handwriting sheet.
Change the setting after removing the
card.
The card is currently writable from PC.
Set to [Not writable from PC].
The paper size is not correct. Check
the page size you have set.
Failed to scan Photo Index Sheet.
Check orientation and position, and
make sure platen and sheet are clean.
<See manual>
Failed to scan handwriting sheet.
Check orientation and position, and
make sure platen and sheet are clean.
Failed to scan Photo Index Sheet.
Check for missed and improper
markings.
Failed to scan handwriting sheet.
Check for missed and improper
markings.
Failed to scan. Either document cannot
be scanned or is not placed on the
platen glass.
Cover is open. Close cover.
Scanner is not operating correctly.
exceeds the prescribed value of 999.
The memory card is not inserted in the slot
properly.
DPOF print was selected in the menu, but no
DPOF files are contained in the memory
card.
Printing was attempted with the print quantity
left "0" (zero).
In Layout print, "Mixed 1, 2, or 3" which is
available only with A4 or Letter size paper is
selected, but the paper size is not set to A4 or
Letter.
The selected layout on the handwriting sheet
is not supported for Stickers.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
With the memory card set to "Writable from
PC," Card Direct printing operation was
attempted from the menu.
Non-supported size of paper for Camera
Direct printing via PictBridge connection is
selected.
The machine failed in scanning the Photo
Index Sheet.
The machine failed in scanning the
handwritten Photo Index Sheet.
The machine scanned the Photo Index Sheet,
but markings in the sheet were incorrect.
The machine scanned the handwritten Photo
Index Sheet, but markings in the sheet were
incorrect.
The machine failed in scanning the document
for Fit-to-page copy.
The cover was opened during printing.
The CIS cannot detect the home position, or
the scanner unit warming-up is not performed
properly at power-on.
10 / 44
quantity returns to the value before the error.
Set a memory card properly.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
A temporary error. Specify the print quantity.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
A temporary error. Press the OK button to
clear the error. The LCD returns to the
display before the error occurrence.
A temporary error. Remove the memory card,
then change the Read/Write attribute.
A temporary error. Remove the memory card,
change the memory card setting to Read-only,
then perform Card Direct printing.
Cancel printing on the digital camera.
Confirm the paper size, and print again.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index
Sheet.
- Place the sheet in the correct orientation and
position.
Press the OK button to clear the error.
Confirm the following, then try again:
- Fill in all the circles on the Photo Index
Sheet properly.
- Place the sheet in the correct orientation and
position.
Press the OK button to clear the error. Correct
the settings, then try the operation again.
Close the cover. The LCD returns to the
display before the error occurrence.
Press the OK button to clear the error, and
turn the machine off and on again. If the error
still occurs, repair servicing is required.
Sayfayı Yazdır