Canon PIXMA MX420 Series Ağ Kurulumu Sorun Giderme - Sayfa 15
Hepsi Bir Arada Yazıcı Canon PIXMA MX420 Series için çevrimiçi göz atın veya pdf Ağ Kurulumu Sorun Giderme indirin. Canon PIXMA MX420 Series 34 sayfaları. Cartridge reset
Ayrıca Canon PIXMA MX420 Series için: Kurulum Kılavuzu (24 sayfalar), Teknik Özellikler (2 sayfalar), Ağ Kurulum Kılavuzu (14 sayfalar), Ağ Kurulum Kılavuzu (9 sayfalar), Kurulum (29 sayfalar), Manuel (4 sayfalar)
Sayfayı Yazdır
Specifying the Machine's IP Address (IPv4 only)
Action
The machine's IP Address can be specified by the following procedure.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Other settings, then press the OK button.
5
Select IPv4/IPv6 setting, then press the OK button.
6
Select IPv4, then press the OK button.
7
Select Yes, then press the OK button.
8
Select Manual setup, then press the OK button.
•
Follow the on-screen instructions to proceed with settings.
Restoring the Machine's Default LAN Settings to Perform Setup Again
Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Press the Setup button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
5
Select Yes, then press the OK button.
6
Make sure that the completion screen appears, then press the OK button.
The LAN setting of the machine is now restored to the default state.
•
Perform setup again by following the procedures in "Wireless Setup" and onward or "Wired
Setup" and onward in the printed manual: Getting Started.
<Default State>
Wireless LAN
Inactive
SSID
BJNPSETUP
Data encryption
Inactive
TCP/IP setting
Obtain an IP address automatically
Wired LAN
Inactive
TCP/IP setting
Obtain an IP address automatically