Canon PIXMA MX439 Kurulum Kılavuzu - Sayfa 2

Hepsi Bir Arada Yazıcı Canon PIXMA MX439 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Canon PIXMA MX439 6 sayfaları. Guide for printer setup for network [spanish version]
Ayrıca Canon PIXMA MX439 için: Başlangıç Kılavuzu (4 sayfalar), Faks Kurulumu (2 sayfalar), Şartname (2 sayfalar), Ağ Kurulum Kılavuzu (15 sayfalar), Manuel (4 sayfalar), (İngilizce) Yapılandırma Kılavuzu (6 sayfalar)

Wireless Connection

a Preparation for Connection

Before Starting Wireless Connection Setup

1. Make sure that the printer is turned on.

If the power is on, the ON button (A) will be lit.

•

Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your

printer to.

The conﬁ guration, router functions, setup procedures and security settings of the network device vary depending on your

•

system environment. For details, refer to the manual of your network device or contact its manufacturer.

•

Check if your device supports IEEE802.11n, 802.11g or 802.11b.

•

If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the

security protocol for your device to something other than WEP and TKIP or change the setting to something other than

"IEEE802.11 n only."

For ofﬁ ce use, consult your network administrator.

•

Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing

•

data such as your personal information to a third party.

•

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an

access point, is not supported. Be sure to prepare an access point.

b Printer Setup

1. Press the Setup button (A) on the printer.

2. Use the

3. Press the OK button (B).

button (A) to select Device settings.