<The portion replaced in the partial replacement>
- Entire main ink absorber: Indicated by the green lines
- The portion to be replaced in partial replacement: Indicated by the blue lines
(8) Ink absorber counter setting
Before replacement of the logic board, check the ink absorber counter value, and register it to the replaced new logic board.
In addition, according to the ink absorber counter value, replace the ink absorber (ink absorber kit). When the ink absorber is
replaced, reset the applicable ink absorber counter (to 0%).
- How to check the ink absorber counter value:
See
3-4. Verification Items, (1) Service test
- How to set the ink absorber counter:
See
"Ink absorber counter setting"
(9) User mode
Function
Print head manual cleaning
Print head deep cleaning
Rear tray paper feed roller
cleaning
Front tray paper feed roller
cleaning
Nozzle check pattern printing
Manual print head alignment
Bottom plate cleaning
print.
below.
Procedures
- Cleaning both Black and Color:
Perform via the machine operation panel.
- Cleaning Black or Color separately, or both Black and
Color:
Perform from the MP driver Maintenance tab.
- Cleaning both Black and Color:
Perform via the machine operation panel.
- Cleaning Black or Color separately, or both Black and
Color:
Perform from the MP driver Maintenance tab.
Perform via the machine operation panel, or from the
MP driver Maintenance tab.
Clean the rollers manually.
Perform via the machine operation panel, or from the
MP driver Maintenance tab.
Perform via the machine operation panel, or from the
MP driver Maintenance tab.
Perform via the machine operation panel, or from the
MP driver Maintenance tab.
30 / 41
Remarks
Set a sheet of plain paper (A4 or Letter) in
the rear tray or the front tray which is
selected on the Paper Feed Switch button.
Set 2 sheets of plain paper (A4 or Letter) in
the rear tray or the front tray which is
selected on the Paper Feed Switch button.
Cleaning of the platen ribs when the back
side of paper gets smeared.
Fold a sheet of plain paper (A4 or Letter) in
half crosswise, then unfold and set it in the
rear tray with the folded ridge facing down.
Sayfayı Yazdır