DoorKing 1620 Series Kurulum Kılavuzu - Sayfa 15
Otomatik Bariyerler DoorKing 1620 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DoorKing 1620 Series 20 sayfaları. Lane barrier
Ayrıca DoorKing 1620 Series için: Kurulum Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Install Reverse/LED Edge on Octagon Arm
Install on a 14 ft aluminum octagon arm for a 1601 barrier gate operator.
Note: DO NOT operate arm with a malfunctioning reverse edge.
Edge Installation
2
Slide on Spacer
Tip: Liquid soap will help
spacer slide on easier.
3
Slide on Edge
Tip: Liquid soap will help
reverse edge slide on easier.
4
Reinstall End Cap
Push a screwdriver through the hole in cap to release
spring while pushing cap on. Keep pushing cap on
until a "CLICK" is heard which locks it in place.
1620-065-K-11-21
1
Remove End Cap
Push a screwdriver through hole
in bottom of end cap to release
spring while pulling cap off.
Spacer MUST be used or
edge will slide in slot.
Spacer MUST be
used or edge will
slide in slot.
13
DoorKing Part Numbers
8080-080
Reverse Edge
8080-096
Reverse Edge + Red/Green LED
Octagon Arm
Spacer
Reverse/LED Edge
Cover
Spacer
Reverse/LED Edge