DoorKing 1620 Series Kurulum Kılavuzu - Sayfa 4
Otomatik Bariyerler DoorKing 1620 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DoorKing 1620 Series 20 sayfaları. Lane barrier
Ayrıca DoorKing 1620 Series için: Kurulum Kılavuzu (16 sayfalar)
Sayfayı Yazdır
DoorKing Safety for Lane Barrier
•
DKS Lane Barrier System is NOT crash rated. It is intended to provide a formidable barrier to help prevent
passenger vehicles and light-duty trucks from driving through a controlled traffic lane.
•
Lane barrier MUST have reverse/LED edge on arm, traffic light and photoelectric cell functioning or remove
lane barrier from service until repairs have been made.
•
Make sure all warning signs are on operator and arm. They MUST be easily visible.
•
Do not install the operator in such a way that the arms moves within 16 inches of a rigid object or 10 feet
from high voltage power wires with arm in the raised position.
•
Speed limit through barrier area is 5 MPH. Install speed bumps, warning signs and hazard stripes where
visible in the area of the lane barrier gate, failure to do so may result in injury, damage to operator and vehicle.
•
Users should be familiar with proper use of operator, these include; hardware operation, reversing functions and
testing, reversing loops, inherent reversing system, electric edges, photoelectric cells related external devices and
possible hazards.
•
Keep adults, children and objects away from operator and HAZARD ZONES.
•
Automotive ONE-WAY traffic only - No bicycles or motorcycles.
Pedestrians MUST be provided with separate access.
•
All electrical connections should be made in accordance with local electrical codes.
•
Security features should be installed to avoid unauthorized use.
•
Controls intended for user activation must be located at least six feet (6') away from any moving part of the
barrier gate and where the user is prevented from reaching over, under or around the lane barrier gate to operate
the controls. Emergency access controls only accessible by authorized personnel (e.g., fire, police, EMS) may be
placed at any location in the line-of-sight of the lane barrier gate.
•
When manually operating the gate operator arms, the user MUST make sure that the gate area is clear BEFORE operating the
controls. Any activity in the traffic lane should be monitored to ensure a safe operation when opening or closing the lane barrier
gate. The motion of the barrier arms must be directly observable by the person operating the lane barrier. While barrier arms are
in motion
NO pedestrian and NO vehicle shall be in the immediate vicinity of the lane barrier area.
•
When removing the operator from service, move the arms to the full open position and shut off power at the
service panel.
•
Operators and components should be properly installed and maintained following the
recommended service schedule, test the operator monthly. Keep all debris out of arm channel
and from operator housing vents and off of arms. Contact your service dealer for any
maintenance or repairs.
•
Vehicular lane barrier gate operator can produce high levels of force, it is
important that you are aware and eliminate possible HAZARDS;
Pinch Points, Entrapment Areas, Overhead Power Wires,
Absence of Controlled Pedestrian Access, Traffic Backup.
1620-065-K-11-21
Photo Sensor
When the photo
beam gets interrupted by a
pedestrian, a lowering arm
will reverse and raise.
2
Moving Gate Can Cause
Serious Injury or Death
KEEP CLEAR! Gate may move at any time
without prior warning.
Do not let children operate the gate or play
in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance.
IMPORTANT: A lane barrier gate
operator installed WITHOUT any
external safety sensors CANNOT
sense a person under the raised
arm and can strike them while
the arm is lowering.
This scenario is VERY
DANGEROUS and MUST
NEVER OCCUR!!
G
G
G
,
,
NG
NG
RM
M
M
M
can
c
can ge e
age
age
e
h th
h.
W AR
NI
G
AR
AR
AR
AR
dam
e dam
e da r dea
e d
dam
d
dea
dea
th
th.
VIN
veh
icle
or
or
or
m
MO
s inj
se
ury
of
arm
rm
rm
cau
iou
EA
R
ser
CL
es.
ns
ST
AY
tim
tria
at
all
:
Pe
des
es
les
NO
Bic
ycl
cyc
Mo
tor
53382
S TO
ANSI/UL-
CONFORM
325
D
TO
247
CERTIFIE
CAN/CSA
C22.2
NO.
OR
HP
AR
GATE
OPERAT
VEHICUL
CLASS
MODEL
PHASE
SERIAL
60
Hz
VOLTS
AMPS
GATE
LOAD
, CA
MAX
Inc.,
Inglewood
DoorKing,
s e
a u
n C
C a
a th
D e
e
a te
y tim
o r
g G
e at
an
ry
pl ay
v in
In ju
m ov
M o
u s
ay
te
or
e m
e ga
ri o
G at
e th
S e
g.
EA
R!
rn in
er at
ly.
nc
e.
CL
io r
wa
re n
op
s on
tra
EP
en
KE
t pr
ild
.
hi cle
ra te
wi th
ou
t le
t ch
ar ea
fo r
ve
pa
e se
no
ga
te
e is
t us
Do
th e
nc
m us
in
en
tra
is
st ria
ns
Th
de
Pe