Canon PIXMA MX882 Series Ağ Kurulum Kılavuzu - Sayfa 8
Hepsi Bir Arada Yazıcı Canon PIXMA MX882 Series için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Canon PIXMA MX882 Series 34 sayfaları. Using your multifunction with additional computers on your network mac os
Ayrıca Canon PIXMA MX882 Series için: Manuel (10 sayfalar), Kurulum Kılavuzu (23 sayfalar), Ağ Kurulum Kılavuzu (14 sayfalar), Ağ Kurulum Kılavuzu (19 sayfalar)
Sayfayı Yazdır
•
When using an access point that does not support WPS, configure settings manually. For the
procedure to configure settings of the machine manually, refer to "Wireless Setup Using Easy
Setup" in the printed manual: Getting Started.
Problems during Software Installation
The Machine is Not Displayed (Detected)
Check
A
B
C
Check 1
For a wireless connection, make sure that you follow Check 1, 2, 3, 4, 5 and 8 of
"Connection Checklist" on page 15, then click Update (A).
For a wired connection, make sure that you follow Check 1, 2, 6, 7 and 8 of
"Connection Checklist" on page 15, then click Update (A).
Check 2
Is the machine connected to a network?
•
To confirm the connection status, press the Setup button, then using the { } [ ] and OK
buttons, select Device settings > LAN settings > Confirm LAN settings > WLAN setting list
or LAN setting list. Make sure that Connection is set to Active.
If the machine is not connected to a network, perform setup again by following the
procedures in "Wireless Setup" and onward or "Wired Setup" and onward in the printed
manual: Getting Started.
•
Check Check the printer settings (B), click Next (C), then click Wireless LAN Setup
Information on the Check Printer Settings dialog box to display the access point information
stored on your computer. Refer to the information when configuring the network setting for the
machine. Wireless LAN Setup Information may not be displayed. (* Wireless connection only)
A
B
C