Astralpool QB600 Kullanıcı El Kitabı - Sayfa 6
Yüzme Havuzu Vakumu Astralpool QB600 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Astralpool QB600 16 sayfaları.
Sayfayı Yazdır
6
Section 3. Trolley Assembly (QB800)
3.1
Contents
The packaging should contain the following items:
•
Cleaner and floating cable with swivel
•
Control unit
•
Manual, Quick Start Guide, and Warranty Card
•
Transport and storage caddy components
(depending on model):
a.
handle frame
b.
support blocks (x 2)
c.
wheels (x 2)
d.
wheel locking clips (x 2)
e.
wheel axle / hubcap (x 2)
f.
base unit
g.
cleaner hook
h.
caddy handle
x 2
B
A
F
Figure 1.
Transport Caddy Assembly Components
When unpacking the cleaner and its components:
•
Check to make sure each component is in the box.
•
Check cleaner and components for damage
during transport.
•
If there are any missing parts or damage, contact
Technical Support at 1300 186 875 for Australia or
0800 807 665 for New Zealand.
D
C
x 2
x 2
x 2
E
H
G
QB robotic cleaner
3.2
Assemble the Transport Caddy
1.
Unscrew the handnut from the base.
Figure 2.
Remove Handnut from Base Unit
2.
Insert the metal handle frame tubing into the base
with notch end at the top, then rotate so the bends
are away from you.
3.
Push base down so the metal handle frame is seated in
the recess on the underside of the base.
Figure 3.
Connect Metal Frame to Base Unit
4.
Slide the handnut over the tube and twist to tighten
onto base unit.
Owner's Manual