Astralpool RF Robotic Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 4

Yüzme Havuzu Vakumu Astralpool RF Robotic için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Astralpool RF Robotic 17 sayfaları.

Astralpool RF Robotic Kurulum ve Kullanım Talimatları Kılavuzu
Operating the pool cleaner
Plugs Type II
To plug the cable (Fig A) into the socket on the power supply (Fig. B), please do the
following:
1.Prepare the plug as seen in (Fig. C) with the key and the riser exactly as shown.
2.The riser should face up (Fig. E) in order to keep the socket cap open. The cap will lock
the cable in place.
3.Fit exactly the key with the corresponding key slot from the power supply socket.
4. Push the plug into the socket of the power supply all the way in.
5. Verify that the socket cap holds the plug in place.
A
B
cable
power supply
plug
socket
THIS
SIDE UP
E
C
D
cap
riser
key
key
cable
power supply
plug
socket
Socket (B)
Cable plug (A)
Grounding
The power supply must be connected to a grounded 3 conductor socket. The mains power supply
must be connected via a GFCI (ground fault circuit interrupter) or RCD (residual current device)
having a rated residual operating current not greater than 30mA.
Fuse
The fuse must be changed by an authorized service agent or trained and qualified person only.
For continued protection against risk of fire, replace only with the same type and rating of fuse.
Maintenance and safety
The cover should not be removed except by an authorized service agent or trained and qualified
person. No internal adjustment or component replacement can be carried out by the user. The
power cable must be disconnected before removing the cover.
If the power supply cord is damaged, it must be replaced by an authorized service agent or trained
and qualified person. Do not operate the supply if the cord is damaged.
Environmental conditions
The power supply is designed to work both indoors and outdoors. However, the unit should not be
operated in direct sunlight or be exposed to water. The power supply should not be operated in an
ambient temperature in excess of 40ºC.
Physical
Dimensions (W * D * H)
Weight
Electrical
Input rating
Output rating
Storage temperature
cable
Operating temperature
plug
Ingress protection
1
External Timer Capability
This feature will enable the end user to
program the cleaning schedule through
an external timer (sold separately).
4
273mm * 242mm * 90mm
1.9 Kg
100-240V~, 50/60Hz, 210W
29V ,6.3A.
-10° C - 60° C
0° C - 45 ° C
IP54
4
2
3
5
1. Unit
2. Cable
3. Power supply
4. Power supply plug
5. External timer
6. Outlet
6