Astralpool 25462 Kurulum ve Bakım Kılavuzu - Sayfa 4
Su Pompası Astralpool 25462 için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Astralpool 25462 16 sayfaları. Self-priming pump for pools
Sayfayı Yazdır
• Place a sump with an adequate outlet for the liquid where flooding is likely
to occur.
• The pump cannot be installed in Zone 0 (Z0) or Zone 1 (Z1). To see drawings
refer to page 6.
• See the maximum total head (H max), in meters on the back cover of the
manual specific to each range of pump.
• The unit should be connected to an alternating current supply (see data on
the pump's plate) with an earth connection, protected by a residual current
device (RCD) with a rated residual operating current that does not exceed
30 mA.
• A disconnector must be fitted to the fixed electrical installation in accor-
dance to the installation regulations.
• Failure to heed the warnings can cause serious damage to the pool' s equipment
or serious injury, including death.
• Observe the regulations in force on accident prevention.
• Before handling the unit, ensure that the power supply is switched off and
disconnected from the mains.
• If the unit breaks down, do not try to repair it yourself. Contact a qualified
service engineer instead.
• All modifications to the pump require the manufacturer's prior authoriza-
tion. Spare parts and original accessories authorized by the manufacturer
ensure greater safety. The pump's manufacturer may not be held liable for
any damage caused by unauthorized spare parts or accessories.
• Do not touch the fan or moving parts and do not place a rod or your fingers
near the moving parts while the device is running. Moving parts can cause
serious injury or even death.
• Do not dry-run the pump or without water (the warranty will become null
and void).
• Do not do any maintenance or repair work on the device with wet hands or
if the device is wet.
• Do not submerge the device in water or mud.
4
Installation and general maintenance manual
- SELF-PRIMING POOL PUMPS