Air Dry Twin Fold Ground Mounted Montaj Talimatları Kılavuzu - Sayfa 5

Raflar ve Standlar Air Dry Twin Fold Ground Mounted için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Air Dry Twin Fold Ground Mounted 8 sayfaları. Clothesline

Sayfayı Yazdır

www.airdryclotheslines.com.au

Step 6:

Attaching the twin fold unit

•

2 x 110mm bolts

•

2 x 90mm bolts

•

4 x nuts

•

4 x washers

•

New long spreader bar (Step 4)

Make sure that the wall side sticker is facing away from

you and place it up to the first post. Take the 110mm bolt

with a washer and insert it through the top hole of the

arm assembly and through the post. Lift one end of the

long spreader bar and place it onto the bolt and secure

with a nut. Take the 90mm bolt with the washer, place it

through the bottom hole on the arm assembly then

through the post and secure with a nut.

Repeat with the opposite arm assembly. Measure the distance between the top of the posts and the

bottom of the post and make sure this is the same and parallel. Adjust if needed.

Step 7:

Assembling the front bars

Inner frame: Place the small spreaders

on the ground. Insert the 2 spreaders

into each end of the joiner to make

one long bar. Place each end of the bar

into the ends of the 750 inner frame

arms.

Outer Frame: Place the large

spreaders on the ground. Insert the 2

spreaders into each end of the joiner

to make one long bar. Place each end

of the bar into the ends of the 1500

outer frame arms.

