Astralpool E Series Manuel - Sayfa 9

Yüzme Havuzu Pompası Astralpool E Series için çevrimiçi göz atın veya pdf Manuel indirin. Astralpool E Series 16 sayfaları. Saltwater chlorinator
Ayrıca Astralpool E Series için: Kurulum ve Kullanım Talimatları Kılavuzu (12 sayfalar)

Sayfayı Yazdır

e series saltwater chlorinator

Section 6. Operation

6.1

User Interface Overview

User Menu

Enter the

highlighted

selection

Figure 7.

Controller User Interface

6.2

Initial start-Up

CAUTION

To avoid risk of serious damage to the equipment,

ensure that all salt added to the pool has completely

dissolved before activating the chlorination function of

your system.

The following setting must be configured at the

initial start up of the device. Settings can be

changed or updated at a later time using the

general menu, details can be found in Section 7.

Output can be set between levels 1 to 8 (P1 to P8),

this is controlled in increments from the "main

screen" by pressing UP

value is valid until the next modification.

6.2.1

System Power

Press AUTO

to cycle between:

Manual - Running

Manual - Stopped

Auto

Auto – Running indicates that the chlorinator is

running within a timer period.

Auto – Stopped indicates that the chlorinator is

outside of a timer period.

Installation Manual

or DOWN

. The set

Auto - Running/Stopped

Manual - Running

Manual - Stopped

6.2.2

Set Clock

Press MENU

and screen should display CLK.

Press ENTER

and the hour digit will flash. Use

or DOWN

Press ENTER

to change to minutes and set.

Use UP

or DOWN

Press ENTER

and select AM or PM. Use

or DOWN

Press MENU

to save.

Browse current menu;

Increase or decrease

a setting

to adjust.