Astrapool Viron Series Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 6
Su Filtrasyon Sistemleri Astrapool Viron Series için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Astrapool Viron Series 14 sayfaları. Salt chlorinator
Sayfayı Yazdır3.2 SETTING TIMERS
Your Viron Series chlorinator has 4 timers per day enabling you to set different periods in which your filtration pump, pH
control and chlorine production will operate. Timers are set by entering a start time, and a RUN time for how long you
want to operate. To set timers, do the following:
a. Press the TIMER button.
b. Press HOUR button to set the hour for the timer selected and use the Up/Down arrows to change the time.
c.
Press MIN button to select the minutes for the timer selected and use the Up/Down arrows to change the time.
Press the NEXT button to select the RUN time or another time and set as required. Note: The RUN time
represents the number of hours you want the unit to operate for.
d. When finished, press the NEXT button a number of times to scroll through the other times until you return to
normal display. This saves your new settings.
e. Select Auto Sanitising by pressing the POOL mode button. The POOL mode button has three settings, manually
ON which turns on system indefinitely, manually OFF which turns system off indefinitely, and AUTO mode which
sets the controller on timer clock mode. In AUTO mode the LCD screen will display the date and pool sanitiser
message.
3.3 TIMER RECOMMENDATIONS:
AstralPool recommend that you use two timers, one for the morning and one for the evening and typically for periods of 2-5
hours for each. Your Viron Series chlorinator is most effective if running in the early morning or evening when it is cooler
(strong sunlight consumes more chlorine). As a default, the control is set to come on at 08:00 hours and 16:00 hours both
for periods of 4 hours.
Timer
POOL SANITISING OFF
Clock
SET
Inst305 - Viron Series Chlorinator Instructions V05-17
UNTIL 16:00
MAINT
6