Acer AcerPower 6500 Kullanıcı Kılavuzu - Sayfa 32
Masaüstü Acer AcerPower 6500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer AcerPower 6500 33 sayfaları. Acer acerpower 6500: user guide
Ayrıca Acer AcerPower 6500 için: Kullanıcı Kılavuzu (14 sayfalar)
Sayfayı YazdırHere are some corrective measures for error conditions:
1.
Run Setup. You must know the correct configuration values for
your system before you enter Setup, which is why you should
write these values down when the system is correctly configured.
An incorrect Setup configuration is a major cause of power-on
error messages, especially for a new system.
2.
Remove the system cover according to the directions in the
system housing installation guide. Check that the system board
and any expansion boards are set correctly.
3.
If you cannot access a new disk, it may be because your disk is
not physically formatted.
FDISK and FORMAT commands.
4.
Check that all connectors and boards are secure. Consult the
system housing installation guide for assistance.
If you follow the corrective steps above and still receive an error
message, the cause may be an equipment malfunction.
If you are sure that your configuration values are correct and your
battery is in good condition, the problem may lie in a damaged or
defective chip. Contact an authorized service center for assistance.
1-32
Physically format the disk using the
User's Guide