Doosan DL200-3 Mağaza El Kitabı - Sayfa 12
Kompakt Yükleyici Doosan DL200-3 için çevrimiçi göz atın veya pdf Mağaza El Kitabı indirin. Doosan DL200-3 15 sayfaları. Wheel loader
Ayrıca Doosan DL200-3 için: Mağaza El Kitabı (18 sayfalar)
Sayfayı Yazdır
Crushing and Cutting
Keep objects away from moving fan blades. Fan blades can
throw and cut objects.
Do not use a wire rope that is kinked or frayed, or a wire rope
with any loss of diameter. Wear leather gloves when handling a
wire rope.
When striking a loose retainer pin, it can fly out and can cause a
serious injury. Make sure that area is clear of personnel when
striking a retainer pin. To avoid injury to your eyes, wear safety
goggles when striking a retainer pin.
Do not put your hand, arm or any other part of your body
between movable parts. If going between movable parts is
necessary, always position and secure work equipment so it
cannot move. Properly support equipment before performing
any work or maintenance under raised equipment.
If control levers are operated, clearance between machine and
work equipment will change and this may lead to serious
damage or can result in death or serious injury. Stay clear of
areas that may have a sudden change in clearance with
machine movement or equipment movement. Stay clear of all
rotating and moving parts. Unless instructed, never attempt
adjustments while machine is moving or while engine is running.
Do not depend on hydraulic cylinders to support raised
equipment. Equipment can fall if a control is moved, or if a
hydraulic line breaks, is loosened or disconnected.
If it is necessary to remove guards to perform maintenance,
always install guards after maintenance is completed.
Always have at least two people working together if the engine
must be running during service. One person needs to remain in
the operator's seat, ready to work the controls to stop the
machine or stop engine, if necessary.
HDO1010L
Figure 5
Wheel Loader Safety
SP002397
Page 11