Doosan NHM Series Manuel - Sayfa 12

Endüstriyel Ekipmanlar Doosan NHM Series için çevrimiçi göz atın veya pdf Manuel indirin. Doosan NHM Series 15 sayfaları.

NHM/NHP Series

NHM/NHPAPCE2C

② Press DOWN key and change the display to home position setting mode.

③ Press SET key for more than 5 seconds and the display will set the parameter automatically

and the turn back the display to home position setting mode.

SET

Press the SET Key

for more than 5 sec

※ After setting the home position, turn the APC/ATC SERVO AMP(A81) power OFF and then

turn it ON in order to complete the setting.