Astria StarLite36WH Kurulum ve Çalıştırma Talimatları Kılavuzu - Sayfa 12
Kapalı Şömine Astria StarLite36WH için çevrimiçi göz atın veya pdf Kurulum ve Çalıştırma Talimatları Kılavuzu indirin. Astria StarLite36WH 18 sayfaları. Indoor and outdoor vent-free firebox
Sayfayı Yazdır
TYPICAL INSTALLATION
Weatherproof
Enclosure
Fireplace
Figure 8
INSTALLING FIREPLACE HOOD
These brushed stainless hood trim kits (36" hood kit - Catalog no. F4128
and 42" hood kit - Catalog no. F4129) may be used with these outdoor gas
fireplaces. These kits contain one brushed stainless hood, two (2) screws
and these instructions.
Installation Instructions:
To install the hood trim kit, refer to Figure 9 and follow the steps outlined
below:
Step 1. Turn off the fireplace and allow it to cool before proceeding.
Step 2. Place the hood lip under the face top opening, as shown in Figure
9 - Step 1. Attach the hood with two (2) screws, one each side,
as shown in Figure 9 - Step 2. Completed installation is shown in
Figure 9 - Step 3.
12
INSTALLATION Continued
Optional Drain Pan
Astria.us.com
Face Top
Place the hood lip
up and under the
face top opening
Hood Lip
Attaching Screw
(seen from below)
STEP 2
Figure 9
REPLACEMENT PARTS
NOTE: Use only original replacement parts. This will protect your
warranty coverage for parts replaced under warranty.
Normally, all parts should be ordered through your IHP distributor
or dealer. Parts will be shipped at prevailing prices at time of order.
NEVER USE SUBSTITUTE MATERIALS. USE OF NON-APPROVED
PARTS CAN RESULT IN POOR PERFORMANCE AND SAFETY HAZ-
ARDS.
TECHNICAL SERVICE
You may have further questions about installation, operation, or
troubleshooting. Please contact your IHP dealer for any questions or
concerns. When contacting your dealer please have your model and
serial numbers of your appliance ready. You can also visit our web site
at Astria.us.com
STEP 1
STEP 3
900977-00A