Ames Instruments 64013 Kullanım Kılavuzu ve Güvenlik Talimatları - Sayfa 14

Ölçüm Cihazları Ames Instruments 64013 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Güvenlik Talimatları indirin. Ames Instruments 64013 16 sayfaları. Digital clamp meter. ac 600v cat iii

Sayfayı Yazdır
Frequency/Duty cycle Measurements
Measure frequency up to 10kHz.
1.
Plug black test lead into cOM Jack.
Plug red test lead into INpUT Jack.
2.
Turn Rotary Switch to the position.
3.
Press Hz% to switch to
frequency mode.
4.
Connect the test leads across
the circuit to be measured.
5.
Read measured frequency
on the Display.

Temperature Measurement

1.
Turn Rotary Switch to the °c or °F
position. The Display will show the
current ambient temperature.
2.
Connect red end of Thermocouple
(included) to the INpUT Jack and
the black end to the cOM Jack.
Page 14
For technical questions, please call 1-888-866-5797.
6.
Press Hz% again to switch to duty
cycle mode. Connect the test leads
across the circuit to be measured.
7.
Read measured duty
cycle on the Display.
8.
Press Hz% again to return
to voltage mode.
9.
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
3.
Touch the tip of the Thermocouple
to the object to be tested.
4.
Read measured temperature
on the Display.
WARNING! To prevent electric
shock, remove Thermocouple before
switching between testing modes.
Item 64013