Flycam Flycam 3000 FLCM-3000-Q Kullanım Kılavuzu - Sayfa 8
Kamera Aksesuarları Flycam Flycam 3000 FLCM-3000-Q için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Flycam Flycam 3000 FLCM-3000-Q 14 sayfaları. Handheld video stabilizer
Sayfayı Yazdır
FLYCAM Handheld Video Stabilizer
A D D I N G W E I G H T S A N D P O S I T I O N I N G F O R P R O P E R B A L A N C E
Continuing the assembly and balance requirements to make your Flycam Handheld Video
Stabilizer fully functional you will note that the base platform has a provision to mount the
balance weights in their cups via a slot found on both sides of the post.
The purpose of the counter weight system is to match the low end of the stabilizer to the
weight of the camera and accessories at the high/top end with the gimbaled handle as the pivot
point in between. The heavier the camera and accessories, the more weights are required to
achieve proper balance. Generally as you add weight to one side of the central post, an equal
amount has to be added to the other side to maintain horizontal balance. However if you are
using an offset configuration such as a flip out viewfinder or off center accessories, extra
weights might be needed on the opposite side of the post to counter act and maintain proper
balance.
Total weight fixed to the base platform should be equal to the weight of your camera plus the
head and any accessories.
Horizontal adjustment on the base platform is made by loosening the retaining screws and
moving the mounted cups closer to or further away from the stalk and then retightening. You
will probably need to adjust and re adjust the horizontal position to achieve optimum
performance/personal preference.
Note: When adding weight in the cups, use the supplied foam spacers as silencers to prevent
metal to metal washer noise.
8