Canon 220P - imageFORMULA ScanFront Yazılım Güncellemesi

Tarayıcı Canon 220P - imageFORMULA ScanFront için çevrimiçi göz atın veya pdf Yazılım Güncellemesi indirin. Canon 220P - imageFORMULA ScanFront 11 sayfaları. Scan-to-share
Ayrıca Canon 220P - imageFORMULA ScanFront için: Kullanıcı Kılavuzu (28 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Broşür ve Teknik Özellikler (33 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar)

Canon ScanFront 220/220P System Software Update

Instructions

ScanFront 220/220P system software updates are distributed as .bin files. These files

can be downloaded from the Drivers and Downloads area of the Canon USA support web

site (http://www.usa.canon.com/html/download/sf220.html). Before you can download the

update file you will be prompted to input the 17 digit alphanumeric Product Key located on

the underside label of the ScanFront. When entering the Product Key be sure to use upper

case for any alpha characters in the key. Once the file is downloaded the device can be

updated using the same ScanFront Administrator Mode Web Menu that is used for

configuration and day to day management of the device. The following are the procedures for

applying these software updates.

The configured settings of the device should be backed up before performing a system

software update. Applying new system software will not erase configuration settings such as

user accounts, address book entries, job buttons, etc., but it is always advised to perform a

device backup before performing any software update. With that in mind this document starts

with instructions for backing up the configured settings on the ScanFront in the event those

settings need to be restored after the system software has been updated.

ScanFront Version Up Procedure Version 1.0

Page 1