Canon 8400F - CanoScan Flatbed Scanner Hızlı Başlangıç Kılavuzu - Sayfa 18
Tarayıcı Canon 8400F - CanoScan Flatbed Scanner için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Canon 8400F - CanoScan Flatbed Scanner 36 sayfaları. Canon canoscan 8400f: quick start
Ayrıca Canon 8400F - CanoScan Flatbed Scanner için: Hızlı Başlangıç Kılavuzu (19 sayfalar)
Sayfayı Yazdır
Specifications
Specifications
CanaScan 8400F
Scanner Type
Flatbed
Scanning Element
CCD 6-line color
Light Source
Cold cathode fluorescent lamp
Optical Resolution
3200 x 6400 dpi
Selectable Resolution
25 - 19200 dpi
Color
16 bit input / 16 bit or 8 bit output for each color (RGB)
Scanning Bit Depth
Grayscale
16 bit input / 16 bit or 8 bit output
*1
Scanning Speed*2
Color
10.8 msec./line (1600 dpi), 10.8 msec./line (3200 dpi)
(Photo or Document)
Grayscale, B&W
10.8 msec./line (1600 dpi), 10.8 msec./line (3200 dpi)
Scanning Speed*2 (Film)
Color, GrayScale, B&W
10.8 - S4 msec./line (1600 dpi)
Preview Speed*3
Approximately 2.1 sec.
Interface
USB 2.0 Hi-Speed
*4,
USB (USB 1.1 equivalent)
Maximum Document Size
A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
35 mm strip (negative/positive): 12 frames,
Film Type/Number of Frames
slides (negative/positive): 4 frames
120 format film: max. 6 x 22 cm (filmstrip only)
Scanner Buttons
4 buttons: COPY, SCAN, PDF, E-MAIL
Temperature
10°C to 35°C (50°F to 95°F)
Operating Range
Humidity
10% to 90% RH, 20% to 80% RH when scanning film (without
condensation formation)
Power Requirements
AC adapter (1 00/120/230/240V)
*5
In operation: 20 watts maximum, Stand-by: 4.5 watts (100/120 V)
I
Power Consumption
5.0 watts (230/240 V)
Power Switch Off: 0.5 watts (Using supplied AC adapter)
Maximum Exterior Dimensions
278 x 500 x 122 mm (10.9 x 19.7 x 4.8 in.)
Weight
Approximately 4.4 kg
(9.7Ibs.)
*1
16 bit output supported for film scanning only.
*2
USB 2.0 Hi-Speed mode on Windows
Pc.
Transfer time to computer is not included.
*3
Calibration processing time is not included.
*4
Note that Macintosh computers with USB 2.0 Hi-Speed interface expansion cards are not supported.
*5
AC adapter type varies according to the region in which the scanner is purchased.
• Specifications are subject to change without notice.
Upgrading
to
USB 2.0 (Windows Only)
To upgrade a computer to the USB 2.0 standard, please use one the following USB expansion cards/hubs
that have been verified by Canon for compatibility.
Expansion Cards
• Adaptec USB2connect 5100: PC I bus
• Adaptec USB2connect 31 OOLP: PCI bus
• Adaptec USB2connect 2000LP: PCI bus
• Adaptec DuoConnect: PCI bus
Hubs
• Adaptec XHUB4
• Adaptec XHUB4PLUS
• Adaptec XHUB7PLUS
For installation procedures, please read the instructions that accompany the USB expansion card/hub.