Doran 4300 Operatör El Kitabı - Sayfa 9

Terazi Doran 4300 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Doran 4300 12 sayfaları.

5) To enter the UNDER limit, press and hold the UNDER button until the display

shows "louu" and the UNDER and ACCEPT indicators flash.

6) Then follow steps 2 to 4.

NOTE: To digitally enter in high and low limits, the following parameters must be

configured. The Check Weighing Operation parameter C.o. set to any of the

menu options (5BA, 5BS, 5Bt, 5Bb) that has the five band check weighing

operating mode. The Checklimit Entry Mode C.E. menu is set to SCr option.

Refer to your dealer or Instruction manual for details.

Digital Entry of High and Low Limits: (optional configuration)

1) Zero the scale.

2) If available, place an item with the desired weight on the scale.

3) Press and hold the OVER button until the display shows "High" and the

OVER and ACCEPT indicators flash.

4) Press either the OVER or UNDER button to increase or decrease the limit

value. Holding a button longer will cause the count to accelerate. Press

UNITS or PRINT to cancel the check limit value entry. The display will read

"abort."

5) Once the desired limit is reached, press ZERO to save the limit. The display

will read "donE."

6) To enter the UNDER limit, press and hold the UNDER button until the display

shows "louu" and the UNDER and ACCEPT indicators flash.

7) Then follow steps 4 and 5.

NOTE: To digitally enter in high and low limits, the following parameters must be

configured. The Check Weighing Operation parameter C.o. set to any of the

menu options (5BA, 5BS, 5Bt, 5Bb) that has the five band check weighing

operating mode. The Checklimit Entry Mode C.E. menu is set to SCS option.

Refer to your dealer or Instruction manual for details.

Push-button Entry of High and Low Limits: (optional configuration)

1) Zero the scale.

2) Place an item with the desired high weight on the scale.

3) Press and hold the OVER button until the scale displays "High", the current

weight then "donE." The limit has been saved.

4) Remove the high item and place an item with the desired low weight on the

scale.

5) Press and hold the UNDER button until the scale displays "Louu", the current

weight, then "donE". The limit has been saved.

NOTE: The Push-button Entry of high and low limits is available when the

following parameters are configured. The Check Weighing Operation parameter

C.o. set to any of the menu options (5BA, 5BS, 5Bt, 5Bb) that has the five band