Doran DS7040 Series Kullanıcı Kılavuzu - Sayfa 13

Terazi Doran DS7040 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Doran DS7040 Series 13 sayfaları. Waist high handrail scale

Section 5. Troubleshooting

Weight reading will not repeat or

scale does not return to zero when

weight is removed.

Scale overloads before scale

capacity is reached.

Scale will not come to zero when the

Zero button is pressed.

Weight readings are not correct.

Scale drifts off zero.

Scale shuts itself off or will not turn

on.

Problem

What to Do or Check

Person or object other than that being

weighed is touching the scale.

Verify that there is nothing caught in or

interfering with the platform.

Verify scale calibration is correct. If

problem persists, recalibrate the scale.

Make sure that the scale is stabilizing

(Motion annunciator is off). After pressing

the Zero button, the scale should zero as

soon as it becomes stable.

Verify the scale calibration with an

accurate set of test weights. If the

readings are not correct, recalibrate.

Be sure the platform is on a flat surface

and all four feet are touching the floor.

Check for air currents and/or vibration

around the scale.

Press the Zero button to turn on the

indicator.

Check that new batteries are installed

properly in the battery tray.

If using an AC adapter, confirm that it is

firmly plugged into a functioning wall

outlet.

Verify the connector at the rear of the

indicator is properly installed.