Doran DS8030 Kullanıcı Kılavuzu - Sayfa 7

Terazi Doran DS8030 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Doran DS8030 19 sayfaları. Wheelchair scale

can be locked or unlocked by pressing and holding Units for 5 seconds. An "L on"

message is displayed when button is locked and "L off" when unlocked.

Reweigh

To reinitiate the weighing process, press REWEIGH. This will allow a new

measurement to be taken without the patient having to leave the platform.

Tare

To enter a tare weight for a wheelchair, press the TARE button. A "tAre" message

is momentarily displayed, then 15.0 lb. Adjust the weight value by using the ▲ or

▼ buttons. Press the TARE button to save the value and exit the tare entry mode.

If a weight value has been entered, the scale will display NET weight. To clear

current tare weight, press the ZERO button. A menu timer will exit out of this entry

mode if no buttons are pressed within a 30 second time period.

BMI

With the hold weight being displayed, press and hold the TARE button for 1.5

seconds to enter the height of the patient. Adjust the value by using the ▲ or ▼

buttons. NOTE: Select the Height units by pressing the UNITS button to toggle

between the height in inches or centimeters. A menu timer will exit out of this

mode if no buttons are pressed within a 30 second time period.

Display Annunciators

The display annunciators will indicate the scale status.

NET

Net mode is indicated by the NET annunciator. When on, the scale is displaying a

net weight. When off, the scale is displaying a gross weight.

Motion

When the scale senses motion, MOTION will be indicated. Once motion ceases,

a stable reading will be displayed.

Stable Hold

Indicates a stable weight has been achieved and held on the display. This

indicates an accurate weight has been achieved. Note: Weights below 30 pounds

will not be held.

Average Hold

Indicates that the weight held on the display is a result of averaging several

weights due to excessive motion on the scale. Note: Weights below 30 pounds

will not be held. The Average Hold weight may be slightly less accurate than a

Stable Hold weight.

Displaying an Average Hold weight instead of a Stable Hold weight will speed the

weighment process of patients that cannot stand still. The Average Hold weight

will differ from the patient's actual weight based upon the severity of the motion