ASTRO DEVICES Nexus DSC Hızlı Kurulum Kılavuzu - Sayfa 7

Aksesuarlar ASTRO DEVICES Nexus DSC için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. ASTRO DEVICES Nexus DSC 13 sayfaları.

Sayfayı Yazdır

The same rule applies to telescopes installed

on equatorial platforms. Please note that the

telescope should be at 90 degrees to the

ground board, not the ground.

For equatorial mounts 0 degrees altitude

reference is more convenient.

Telescopes on an Equatorial Fork for a 0

degrees altitude reference then be positioned

as below:

The telescope does not have to be

positioned exactly at the angle specified,

but it should be within ±10°. You can also set

the

altitude

reference

between -180° and +180° by selecting

Custom from the list and by adjusting the

angle:

Please note that the altitude reference

Nexus DSC Quick Setup Guide

any

angle

angle is individual for each telescope

configuration – this angle will be stored in

the settings for the currently selected

telescope.

Nexus DSC will automatically switch the

screen to the selection of first alignment

object:

While Nexus DSC can be aligned on any

object in its database it is best to use objects

form either Named Stars catalogue or Bright

Stars catalogue.

It is time to select the first alignment object –

by pressing

to go to the object selection

list and then using

to another star:

Acamar was selected as it is well above 30

degrees. Now the telescope should be pointed

Acamar

using

reticle/crosshair or a very high magnification

eyepiece. Press the

telescope is pointing at the star.

Nexus DSC will now switch to the selection of

a second alignment object:

Please follow the procedure described above

to change the selection of the second

alignment object if necessary.

Press the

button once the star is in the

centre of the eyepiece.

Now Nexus DSC will show the alignment

error:

and

to change

eyepiece

with

button once the