ASTRO DEVICES Nexus DSC Pro Hızlı Kurulum Kılavuzu - Sayfa 6

Aksesuarlar ASTRO DEVICES Nexus DSC Pro için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. ASTRO DEVICES Nexus DSC Pro 13 sayfaları.

Sayfayı Yazdır

ASTRO DEVICES Nexus DSC Pro Hızlı Kurulum Kılavuzu

button by using

key. A text cursor now appears under the name:

You will now be able to edit the name and

change it to your telescope name:

Now you need to set other parameters for your

telescope:

where the mount type can be selected by using

and

keys. The encoder steps are set

to 10000 steps by default and should be set to

the number of steps corresponding to the

number of steps installed on your telescope.

Encoder steps can be set by using the numeric

keys on the keypad. Please change the sign in

front of the encoder steps to a negative sign if

required as described previously:

Two star alignment

Nexus DSC Pro needs to be aligned on two

stars before it can locate celestial objects.

The two star alignment can be performed using

two methods:

Using Nexus DSC Pro itself

Using SkySafari Plus/Pro

Two star alignment using Nexus DSC

Pro

The telescope does not need to be levelled

for Nexus DSC Pro to locate celestial

objects accurately.

The two star alignment is performed in three

steps.

Nexus DSC Pro Quick Setup Guide

and then press the

Please go to the Align menu:

Then select Altitude Reference:

Adjust the altitude reference angle if required:

Now

move

depending on the mount type (for 90 degrees

reference):

Telescopes on Alt-Azimuth mount should be

positioned vertically:

The same rule applies to telescopes installed

on equatorial platforms. Please note that the

telescope should be at 90 degrees to the

ground board, not the ground.

For equatorial mounts 0 degrees altitude

reference is more convenient.

Telescopes on an Equatorial Fork for a 0

degrees altitude reference then be positioned

as below:

the

telescope

into

position