FLYGT FLS Kurulum ve Uygulama Kılavuzu - Sayfa 10

Güvenlik Sensörleri FLYGT FLS için çevrimiçi göz atın veya pdf Kurulum ve Uygulama Kılavuzu indirin. FLYGT FLS 12 sayfaları. Leakage detectors

CONNECTIONS

Leakage alarm will stop the pump

This installation can be used if the leakage alarm shall

stop the pump.

It is recommended if the FLS sensor is used. The FLS

is detecting liquid in the stator housing, which is criti-

cal and requires a quick stop of the pump.

WARNING:

Switch off power supply before

working with the MiniCAS II

socket. There may be a high

voltage at the socket connections.

Leakage alarm will not stop the pump (only

warning)

This installation can be used if the leakage alarm shall

not stop the pump but give a warning on the Mini-

CASII.

It is recommended if FLS10 in inspection chamber or

CLS is used. These sensors detect liquid in the in-

spection chamber (FLS10) and water in the oil (CLS),

which is less critical than water in the stator housing.

FLS10 is used in the new midrange pump series, eg

3153, 3171 and 3202.

**) Fit resistor to avoid short circuit if only thermal contacts are

to be connected.

TECHNICAL DATA