Canon imageCLASS MF6500 Series Başlangıç Kılavuzu - Sayfa 5
Tarayıcı Canon imageCLASS MF6500 Series için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Canon imageCLASS MF6500 Series 16 sayfaları. Canon fax machine starter guide
Ayrıca Canon imageCLASS MF6500 Series için: Başlangıç Kılavuzu (17 sayfalar)
Sayfayı Yazdır
Connect Power Cord and Turn On the Machine
1
Main power switch
Connect the power cord into the rear socket and
the wall outlet and press the [I] side of the main
power switch to ON.
What if...
● <CLOSE COVER/LEFT COVER> is
displayed:
Make sure that the left cover is closed properly.
(See "Install Toner Cartridge," on p. 3.)
● <TONER IS NOT SET/INSERT TONER> is
displayed:
Make sure that the toner cartridge is installed
properly.
(See "Install Toner Cartridge," on p. 3.)
7
2
Without optional cassette
1 0 0 %
A 4
0 1
A
T E X T
With optional cassette
1 0 0 %
A U T O
0 1
A
T E X T
The machine enters standby mode.
WARNING
This product emits low level magnetic flux. If you use a
cardiac pacemaker and feel abnormalities, please move
away from this product and consult your doctor.
NOTE
– During electrical storms, disconnect the power cord
from the power outlet. (Any sent or received documents
stored in memory are backed up for about 60 minutes.)
– Whenever you unplug the machine, wait at least five
seconds before you plug it in again.
– Do not plug the machine into an uninterruptible power
supply (UPS).
Set the Date and Time
[
]
[
]
Numeric Keys
[OK]
[Additional Functions]
1
2
Press [Additional
Use [
Functions].
select <6. TIMER
SETTINGS>, then press
[OK].
4
5
Use the numeric keys to
Press [Stop] to return to
enter the date (day/
standby mode.
month/year) and time (in
24-hour format), then
press [OK].
Ex.
D A T E & T I M E
S E T T I N G
3 1 / 1 2
´ 0 6
1 1 : 1 9
● Entering Information
– Numeric keys: Enter letters and
numbers.
– [
] and [
]: Move the
cursor position.
– [Clear]: Deletes the character
at the cursor position, or the
entire entry if held for more
than one second.
[Clear]
[Stop]
3
] or [
] to
Confirm that
<1. DATE&TIME
SETTING> is displayed,
then press [OK].
8