Canon imageFORMULA DR-2050SP Bakım Kılavuzu - Sayfa 20

Tarayıcı Canon imageFORMULA DR-2050SP için çevrimiçi göz atın veya pdf Bakım Kılavuzu indirin. Canon imageFORMULA DR-2050SP 22 sayfaları. Canon dr-2050c; dr-2050sp document scanner
Ayrıca Canon imageFORMULA DR-2050SP için: Kolay Başlangıç Kılavuzu (2 sayfalar), Broşür ve Teknik Özellikler (26 sayfalar), Broşür ve Teknik Özellikler (16 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Cep Kılavuzu (32 sayfalar), Broşür ve Teknik Özellikler (16 sayfalar)

Paper Is Not Ejected Correctly

When you are performing page-by-page scanning while a multi-page

document is set in the scanner, scanning pauses with the trailing edge of the

scanned sheet being engaged by the eject roller.

Problem

Under these conditions, the scanner enters a standby state

and pauses for the next sheet. It does not indicate a paper

jam.

Solution

To scan the next sheet of the document, manually remove the page

that is engaged by the eject roller, or just start the next scan job.

For details on how to clear jammed paper, see "Clearing a Paper Jam," on

p. 42.

When image files saved by CapturePerfect 3.0 cannot be opened by other

applications, the probable causes are as follows.

Symptoms A multi-page TIFF file saved in CapturePerfect 3.0

cannot be opened by other applications.

Problem

The application you are using to open the TIFF file does not

support multi-page TIFF files.

Solution

Open the file with an application that supports multi-page TIFF

files.

Symptoms A TIFF file saved in CapturePerfect 3.0 cannot be

opened by other applications.

Problem

If the TIFF file saved in CapturePerfect 3.0 has been

compressed, the application you are using to open the TIFF

file does not support the compression type that was used to

save the file in CapturePerfect 3.0.

Solution

Set the compression type for the image file to [None] and save the

file again in CapturePerfect 3.0.

If there is a problem with the scanning result (e.g., the scanned image is not

clear, or the image is striped or dirty), the probable causes are incorrect ISIS/

TWAIN driver settings or a problem with the scanning unit inside the scanner.

Scanning results can also become skewed if the ISIS/TWAIN driver has not

been installed correctly, or the application in use does not support ISIS/

TWAIN driver functions.

Appendices