Dorani Limited DORVT Kullanıcı Kılavuzu - Sayfa 3

İnterkom sistemi Dorani Limited DORVT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dorani Limited DORVT 7 sayfaları. Touch video intercom system, 2 wire system
Ayrıca Dorani Limited DORVT için: Kurulum Kılavuzu (8 sayfalar), Kurulum Kılavuzu (14 sayfalar)

Sayfayı Yazdır

Once your installer has set all the installation programming and parameters, only the

General Programming and Main Menu page should be required.

The General Programming Page is designed for user end programming of such settings

as Time/Date, Ring Tones, Naming Door Stations, etc.

Access the General Programming section by Pressing the monitor on (anywhere on the

screen) and the Pressing the gear symbol

The menu list comes up and all settings can be changed using the onscreen adjustments.

Press on the setting that you wish to change and use the up and down buttons to

ammend

Press Front doorbell button on Outdoor station to create intercom call.

The screen will appear with the image of the door station pressed (on monitors

programmed to alight on call). At this time a snapshot of the caller will be taken.

Answer by pressing ONCE the Speech Symbol

communication can now occur between Door and Monitor.

If a Door locking device is connected Pressing the Door release Buttons

Padlock 1

will trigger the lock to release.

Padlock 2

is reserved for Second locking devices connected to the same door station

– Additional Relay Module is required for this.

Ending the call is by pressing the Return Symbol

Keypad Door stations are fitted with Fish Eye lenses with a wider angle, taping on the

image will zoom to that location for the period of the call.

BASIC USER GUIDE

GENERAL PROGRAMMING

OPERATION

FISH EYE LENS/ZOOM FEATURE

OR Speaker Symbol

– The