Canon imageFormula DR-C225W Wi-Fi Bağlantı Kılavuzu - Sayfa 16

Tarayıcı Canon imageFormula DR-C225W için çevrimiçi göz atın veya pdf Wi-Fi Bağlantı Kılavuzu indirin. Canon imageFormula DR-C225W 40 sayfaları.

Connecting to a Specified Access Point

To connect the scanner to a computer via an access point that does

not support WPS, select the access point for wireless connection

from a list.



If the access point is using security settings (such as MAC address

filtering), change the settings to allow connection to this scanner.



To ensure good Wi-Fi communications, perform this procedure with

the scanner initially located close to the access point.



Computers running Windows XP (64-bit edition) cannot be connected

to the scanner using the following procedure. Configure the settings

necessary for connecting to the scanner in [Custom Setup]. See

"Chapter 3 Changing Scanner Settings" for details.

If the scanner is on, turn it off.

Press and hold the power button until the indicator goes out.

Enable the wireless LAN function of the computer.

This step is not necessary if the wireless LAN function is already enabled.

See "About the Computer's Wireless LAN Function" on p.21 for wireless LAN

function setting details.

Start the Wireless Connection Setup Tool.

If the Wireless Connection Setup Tool is not yet installed on the

computer, see the Setup Guide to install it.

Click [Start] - [All Programs] - [Canon DR-C225] - [Wireless Connection

Setup Tool].

In Windows 8.1/8, it appears as shown below.

From the Finder, double click [Application] - [Wireless Connection Setup

Tool].