Flying Industry Development S4PUW-AC-ANT2 Hızlı Kılavuz - Sayfa 3

Uzaktan Kumanda Flying Industry Development S4PUW-AC-ANT2 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Flying Industry Development S4PUW-AC-ANT2 6 sayfaları. 5000 meters rf wireless receiver

Sayfayı Yazdır
If you want to switch on the feedback function, you need to turn on the third bit of the dip switch.
When the receiver gets the signal of transmitter, it will immediately send a return signal to the transmitter. When the transmitter receive the feedback
signal of the receiver, the transmitter will exude a buzzing sound like "D~" which means it receive the feedback signal successfully.
How to pair the transmitter to the receiver:
1) Press button K1 of receiver for 1- 2 seconds; signal LED on the receiver is turned on. The receiver starts the LEARNING procedure.
2) Press any one button on remote control. If signal LED flashes twice, it means learning is successful.
3) The receiver can learn several transmitters with different codes.
Delete all transmitters:
We have learned remote control to the receiver. If you don't want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes three times. That means all stored codes have been deleted successfully.
SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com