Astro Pneumatic Tool 3026 Manuel - Sayfa 2
Sander Astro Pneumatic Tool 3026 için çevrimiçi göz atın veya pdf Manuel indirin. Astro Pneumatic Tool 3026 4 sayfaları. 12v cordless variable speed palm polisher w/ 2 batteries
Sayfayı Yazdır
Model:
3026
INTRODUCTION
The operating instructions constitute part of this product. They contain important information on safety,
use and disposal. Before using the product, familiarize yourself with all of the operating and safety
instructions. Use the product only as described and for the applications specified.
Please keep this manual safe and in the event that the product is passed on, hand over all
documents to the third party.
SAFETY GUIDELINES
WARNING:
Read and understand the manual instructions. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
WORK AREA
1. Keep your work area clean and well lit.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids,
gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while
operating a power tool. Protect others in the work
area from debris such as chips and sparks.
Provide barriers or shields as needed.
PERSONAL SAFETY
1. Stay alert. Pay attention to the power tool when
operating it. Do not use a power tool while tired or
under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing, and gloves away from moving
parts. Loose clothes, jewelry, or long hair can be
caught in moving parts.
3. Avoid accidental starting. Make sure the switch is in the
locked off position before inserting battery pack.
4. Use safety equipment. Always wear eye protection.
Dust mask, non-skid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
TOOL USE AND CARE
1. Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
2. Do not use the tool if switch does not function
reliably or if switch is nonfunctional. A tool that cannot
be controlled with the switch is dangerous and must
be repaired.
3. Disconnect the battery pack from the tool or place the
switch in the locked off position before starting the tool
to ensure no accidental starting.
Product Type:
12V CORDLESS VARIABLE SPEED
PALM POLISHER W/ 2 BATTERIES
4. Store idle tools out of reach of children and other
untrained persons. Tools are dangerous in the hand
of untrained persons.
5. When battery pack is not in use, keep it away from
other metal objects that can make a connection from
one terminal to another. Shorting the battery terminals
together may cause sparks, burns or a fire.
6. Check for misalignment or binding of moving parts,
broken parts, and any other conditions that may affect
the tool's operation.
7. Use only accessories that are recommend by the
manufacturer for your model.
SERVICE
1. Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.
2. Accessories must be rated for at least the speed
recommended on the tool warning label.
IMPORTANT:
Do not operate the polisher until you have inspected each
part. If any part is missing or damaged, do not use it.
Return the polisher to the place of purchase.
ENVIRONMENTALLY SAFE DISPOSAL OF YOUR BATTERIES
BATTERY SAFETY RULES
1. Do not attempt to open any battery.
2. Do not put the batteries in the regular trash.
3. Do not incinerate any battery.
4. If a leak appears, the released electrolytes are
corrosive, wash your hands and do not get the material
in your eyes or mouth.
5. Dispose your batteries to a certified disposal center.
6. The battery pack not in use shall be far from other
metal objects such as paper clips, coins, keys, nails,
screws or other small metal objects that may cause an
electrical short. The short of the one terminal may
cause sparks, burn and even a fire.
7. The battery pack can only be charged by the charger
supplied in this kit, other types may burst causing
fire or other danger.
Page 2